Product Pictures
Products: LED Panel Lights 5-40W 1200*300
Brand Parameters
(Note: The data is provided by the supplier, please compare with independent testing results by BackMorning.)
Lumen Efficiency: NO MARK
Wattage: 40W
Color Temperature(CCT): 3,000K-6,500K
CRI: 80
Electric Safety Testing
Insurance Resistance: Pass
Electric Strength: N/A
Ground Resistance: N/A
Spectrum & Electrical Testing
Note: For low voltage LED Light Strips, we test the spectrum data of the 1st meter, and test the power of the whole roll.
LED Panel Lights CCT(Color Temperature): 6,336K 4,388K 2,905K
Ra: 83.5 86.1 81.2
CRI: 76.2 80.5 75.4
SDCM: 1.5 7.4 1.4
Power: 42.53W 40.69W 43.37W
Power Factor: 0.97 0.97 0.97
Input Voltage: 230.1V 230.1V 230.1V
Gonio Photometer Testing
(IES testing/ Light Distribution testing/Darkroom testing)
LED Panel Lights Total Lumen: 3,542.3LM
Lumen Efficiency: 85.76LM/W
Beam Angle:114°
UGR:17.5, 17.3
TPA Testing
TPA: Pass
Lumen Maintenance Testing
(Oven, 168hours)
In the beginning
Lumen : 3,542.3LM
LM/W : 85.76LM/W
CCT : 6,336K 4,388K 2,905K
Wattage : 41.3W
After the oven testing
Lumen : 3,564.7LM
LM/W : 87.12LM/W
CCT : 6,484K 4,440K 2,922K
Wattage : 40.9W
Thermal Testing
(Temperature Grow)
Other Testings
Pull: N/A
Workmanship: NEED IMPROVEMENT
Inspector’s Conclusion:
Testing Result:
Fail
Comments:
1.Surface is not good. 2.The SDCM is higher than the specification. 3.Bad Soldering 4. Gap between the cooling and LED PCB 5. Cable under stress 6. The switch has no CCT mark
Note: Our test results are only applicable to the sample tested, and the results can be influenced by aspects such as the design, material, and craftsmanship of the sample. Therefore, it is entirely possible that the product you purchase may not be consistent with our tested sample. If you wish to procure bulk LED light products of excellent quality, please utilize our inspection services