Waichi LED High Bay Light

Is Waichi LED High Bay Light really 190 LM/W?

As a third-party quality inspector with expertise in LED lighting, I am well aware of the challenge in achieving 190 lumens per watt (LM/W) for LED luminaires like LED High Bay Light. This is mostly because the LED Lighting technology almost achieved its limits.

However, Waichi, an LED Lighting Manufacturer, sent me an LED High Bay Light( Ironman4 LED High Bay) sample recently, they claimed it can achieve 190 LM/W

Product Pictures

Products: Waichi LED High Bay Light

Brand: Waichi

Previous slide
Next slide

Brand Parameters

(Note: The data is provided by the supplier, please compare with independent testing results by BackMorning.)

Lumen Efficiency:  190LM/W

Lumen: 43,700LM

Material: IRONMAN4

Rated Voltage: 220-240V

Rated Power: 230W

Color Temperature(CCT): 5,000K

Beam Angle:85°

IP Rating:  IP65

Is this real? So this time I test this High Bay Light sample and verify the data.

Normally, we have two kinds of instruments to test the lumen efficiency, one is the Integrating Sphere, the other is Gonio-photometer which can get accurate efficiency data.

backmorning test results

Spectrum & Electrical Testing

 LED High Bay Light CCT(Color Temperature): 4,847K

Ra: 72.2

CRI: 61.4

SDCM: 2.6

Power: 229.2W

Power Factor: 0.98

Input Voltage: 219.6V

Gonio Photometer Testing

(IES testing/ Light Distribution testing/Darkroom testing)

Previous slide
Next slide

Total Lumen: 43,299LM    34,512LM   25,724LM

Lumen Efficiency: 189.88LM/W   193.06LM/W   194.70LM/W

Beam Angle:77.8°  78.4°  78.2°     

UGR:NO TEST

We have to preheat the light firstly before we start testing  because its output lumen is not stable in the beginning ten minutes or thirty minutes. 

According to the below picture, we can see:

Every ten seconds, the light intensity continues to reduce.

In summary, we need to preheat the lamp before calculate its optical data.

This LED High Bay Light has three different power settings.

Previous slide
Next slide

The independent testing results showed:

So I can give a conclusion:

This LED High Bay Light is a real 190 LM/W Product.

Although the first one(189.88LM/W) is a little bit lower than 190, we can give some tolerance and this one its tolerance is very small: within -1%.

I would like to extend my gratitude to Waichi, the manufacturer, for providing a product with such exceptional luminous efficiency.

Why do we test it and show you the details?

We, BackMorning, are selecting more and more good LED lights and manufacturers, and recommend them to the market, to clean the LED Supply Chain, by using our quality skills. We are continuing to fight with the bad quality at the same time.

As a third-party quality inspection company, we are equipped to safeguard the quality of your LED Lighting products. Our services encompass professional quality inspections, sample testing, and assessments of factory capabilities to provide you with peace of mind regarding product excellence.
Email:[email protected]
WeChat: LNY0539
Whatsapp: +86 18616827523
Web: www.backmorning.com

Picture of Hank Wang

Hank Wang

Supply Quality Management Professor.
Quality Inspector in Lighting Field and Steel Structure Field.
Certified Welding Inspector by American Welding Society.
15 Years' experience of supplier quality management.
Six Sigma Green Belt.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top