How to work with Chinese suppliers?  An Insider Perspective

The development of a company inevitably involves the step of cooperate with excellent suppliers, and it is common to see both domestic and international cooperation.
Read More →

Recommend this LED factory to clients with stringent quality requirements,why?

Why do I recommend this factory? Is it because the factory is big? Is it because the factory gave me a bonus? Is it because their prices are low?
Read More →

Why do we test LED High Bay light in a strange way?

Hello everyone, my name is Hank, and I am a third-party quality inspector responsible for the quality management of OEM/ODM suppliers of LED lighting products, include LED Industry Light-High Bay Light. From the above picture, you can see: 4 pcs high-temperature electric furnaces, temperature measure instruments, thermocouples, industry High Bay lamps, and a small black room.  So, what are we ...
Read More →
lighting quality issues: one of the chip is wrong color

Top 6 lighting quality issues from the factories

Buyers always faces lighting quality issues when they purchase lights, these issues causes big lost, such as : big cost for the aftersale service, delay the project, lose the trust from the customer, etc. So we have to know these common lighting quality issues, and try to prevent them.
Read More →

Sustainability Audit

A sustainability audit is a systematic evaluation of a supplier’s environmental, social, and economic performance to ensure they align with your company’s sustainability goals and standards.  To conduct a sustainability audit for a supplier, you can follow these steps: Establish audit objectives and scope: Define the specific sustainability aspects you want to assess, such as energy efficiency, waste management, working conditions, and supply chain management. Set clear objectives for ...
Read More →

Top 2 problems of Bad Solar Light

The bad solar lights are not only fake parameters, but also high color temperature, which inlude a lot of blue light, it will damage the people's eyes.
Read More →

Will the brightness of the DC light strip gradually decrease as the length increases?

Remarks: For a 20-meter low-voltage DC light strip, the brightness at the beginning of the light strip will be significantly brighter than that at the end.our Heading Text Here If you are going to purchase LED DC light strips, you are likely to encounter the following situations: 1. There will be some lighting brands that promote this: Our light strips ...
Read More →

Why do DC LED lights use thicker wires than AC LED lights? What are the consequences if the wire used is not thick enough?

Tips: LED lights can be divided into DC LED lights and AC LED lights if they are distinguished from the type of input current. LED Strip lights have AC and DC, many work lights are low-voltage DC, and solar lights are also DC lamps. Many outdoor wall washers are also DC fixtures. Of course, there are more AC lamps. The table lamps and ...
Read More →

How to test the Voltage Drop of LED Strip Light

When installing and using LED DC light strips, an important issue that needs to be paid attention to is the voltage drop. Because the voltage drop will cause the brightness of the LED strip to decay as the length increases. Some attenuation is too large, which will seriously affect the output lumen. As a third-party quality inspection and sourcing company, ...
Read More →
Good News 2023

Good News 2023

Good news is China has lifted all the restrictions since January 8th. So, it would be very easy for you come to China and visit all these lighting factories in Shenzhen, in Ningbo, in Xiamen. And we can help you to get reliable and high quality lights from these factories by providing you quality inspection, sample testing, and factory audit ...
Read More →
Misunderstanding about Backlite Panel Lights

Misunderstanding When Sourcing Backlite Panel Lights

You can see some gaps between the PCB and the back plate. Some buyers have a misunderstanding when they select the suppliers or manufacturers for the LED backlight panel lights. Because they think the backlite panel lights’ heat transfer ability is much better than the slim type panel lights. This is somewhat correct because you can see for the backlite ...
Read More →
LED Lighting Project for Airport

Helping BackMorning’s Follower Buy Quality LED Lights for Airport Retrofit Project

Recently, one of BackMorning’s followers on our WeChat channel came to me. He asked for help to find a quality LED lighting manufacturer. He’s working on a lighting retrofit project for an airport in a foreign country. This project is for an airport, which previously used traditional halogen lights. Their quality is also very good, lasting for more than 10 ...
Read More →
Pre-Shipment for LED Stadium Lights

Pre-shipment Quality Inspection for 1,500W LED Stadium Lights

How can we find out the serious problem and preliminarily analyze the causes? Recently, on September 26, 2022, we did a pre-shipment inspection for LED stadium lights of high power 1,000W – 1,500W on behalf of a foreign lighting purchaser. Unfortunately, we found a major quality problem during the inspection (Below, we will introduce the phenomenon, consequences, and causes of ...
Read More →
Detachable LED Streetlight T12A-2 by Shenzhen Manufacturer

Test and Show High Quality Streetlight T12A-2 – Shape and Structure

https://youtu.be/AptvxpQGVLE Recently, we reviewed a LED street light (T12A-2). I wish to talk a little bit about its shape design and structure. You’ll know why I still like it a lot, as a third-party inspector, and even though I’ve seen so many streetlights. (Video at the bottom of this post). 1. This streetlight has a shape design like a python’s ...
Read More →
Defective LED Panel Light Failing Drop Testing

Helping a Foreign Customer Inspect Panel Lights and Troubleshoot with Their Supplier

Recently, we helped a new foreign customer to do a pre-shipment inspection for their LED panel lights. During the drop testing (also called Free Fall testing), we found that some of the lights’ housings were deformed and some parts fell off. We documented all these issues in our PSI report and sent it to the customer. And then, the customer ...
Read More →
Scroll to Top